Conlux MCM5 Coin Mechanism – Refurbished 5-Tube MDB Changer
The Conlux MCM5 coin mechanism is a refurbished, high-capacity 5-tube MDB coin changer configured with the $1 cassette and a 6-pin harness. It accepts and validates US coinage and pays back change from five tubes in a 5¢ / 10¢ / 25¢ / 25¢ / $1 configuration, making it a direct-fit replacement for the coin mech in virtually any Multi-Drop Bus (MDB) vending machine — snack, soda, combo, or specialty.
Built around a removable high-capacity cassette, the MCM5 holds up to two full rolls of coins per tube and eliminates the change starvation that stalls sales on busy routes. It delivers up to three coins simultaneously for faster payout, and its tubes are accessible from the back of the cassette so operators can top off change quickly during a service stop. This is the part that keeps a machine taking money instead of flashing “Use Correct Change.”
Specifications
| Brand | Conlux (Crane Payment Innovations / CPI) |
| Model | MCM5 — $1 Cassette |
| Type | MDB 5-tube coin changer / coin mechanism |
| Interface | Multi-Drop Bus (MDB), 6-pin harness |
| Coin payout config | 5¢ · 10¢ · 25¢ · 25¢ · $1 |
| Rated voltage | 34 VDC |
| Power draw | 12 W, 0.92 A peak |
| Dimensions (H×W×D) | 14.83" × 5.43" × 3.23" (376 × 137 × 82 mm) |
| Weight | 3.5 lbs (1.6 kg) |
| Operating temperature | 5°F to 140°F (-15°C to 60°C) |
| Payout speed | Up to 3 coins simultaneously |
| Programming | 9-button keypad, labeled inhibit/dispense controls |
| Condition | Refurbished — tested & cleaned |
| Warranty | 1-year limited (refurbished part) |
Key features
- High-capacity cassette — each tube accommodates two full rolls of coins, cutting change-starvation downtime on high-traffic locations.
- Fast payout — simultaneous three-coin dispensing speeds transactions and keeps lines moving during peak periods.
- Rear-loading tubes — coins fill from the back of the cassette, so route drivers refill change without pulling the whole mech.
- Low idle draw — engineered to use roughly 30% less power at idle than comparable changers.
- Simple programming — a 9-button keypad and clear labeling make coin inhibit, tube fill, and diagnostic routines quick to run.
- Universal MDB fit — mounts on the standard three studs and plugs into the MDB coin harness used across the industry.
About Conlux and CPI
Conlux is a long-established coin-handling brand now part of Crane Payment Innovations (CPI), one of the largest makers of unattended-payment hardware for vending, amusement, and self-service equipment. The MCM5 changer sits alongside CPI bill validators and cashless readers as a proven, field-serviceable coin platform, which is why it remains a go-to mech for operators standardizing a fleet on MDB payment hardware.
Where this coin mechanism earns
Because it is a universal MDB part, the MCM5 fits the machines that anchor most routes — snack and combo vendors in offices and break rooms, soda machines in gyms and laundromats, and specialty units at car washes and hotels. Any location that still takes cash benefits from the larger cassette: fewer “exact change” lockouts means fewer walked-away sales. Operators typically keep a spare coin mech on the truck so a failed changer is a five-minute swap instead of a dead machine, and the MCM5’s rear-fill tubes make routine change top-offs faster on every visit.
Condition & what’s included
This Conlux MCM5 coin mechanism ships refurbished — inspected, cleaned, function-tested, and configured with the $1 cassette and 6-pin MDB harness ready to install. It carries Finn Vending Sales’ 1-year limited warranty covering the refurbished part, with US remote tech support if you need help programming or diagnosing it in your machine.
Why buy from Finn Vending Sales
We ship free across the continental United States and prepare your order within 1–2 business days of payment. Every part is backed by a 30-day return window with free return shipping on approved returns, and our team can help you confirm compatibility before you buy. Not sure it’s the right mech for your machine? Use secure checkout on this page and we’ll review it with you. Browse more coin mechs and payment hardware in our Vending Machine Parts & Accessories category, and if you’re building a route from scratch, our Buyers Guide walks through matching machines and payment systems.
Compare related machines
Buyers weighing this machine also look at these Finn Vending Sales listings:
- Conlux MCM5 MDB 5 Tube Coin Mechanism (Refurbished) — $204
- Mars VN4510 MDB 4 Tube Coin Mechanism (Refurbished) — $142
- MEI – Mars CF7512 5 Tube (DCC) Coin Mechanism 25-10-25-25-5 (Refurbished) — $202
- Conlux MCM5-4 Coin Mechanism for a Vending Machine — $350
Frequently asked questions
What coins does the MCM5 pay out? This unit is configured 5¢ / 10¢ / 25¢ / 25¢ / $1 across its five tubes, so it can accept and return nickels, dimes, quarters, and $1 coins.
Will it fit my vending machine? The MCM5 is a standard MDB coin changer that mounts on the usual three studs and uses the 6-pin MDB coin harness. It fits virtually any MDB-equipped snack, soda, or combo machine. If your machine is older single-price or pulse-based, confirm it supports MDB before ordering.
What power does it need? It runs on the 34 VDC supplied over the MDB bus, drawing about 12 W (0.92 A) — there is no separate power supply to add; the machine’s MDB harness powers it.
Is this new or refurbished? It is a refurbished unit — tested, cleaned, and verified working before shipment — not new.
What warranty comes with it? A 1-year limited warranty on the refurbished part, plus remote tech support for US customers.
Can I add a card reader to the same machine? Yes. Because the machine uses the MDB bus, you can run this coin mech alongside an MDB bill validator and a cashless/credit-card reader (such as a Nayax unit) on the same harness for full cash-plus-card acceptance.
How is it delivered? As a boxed part via ground shipping, free within the continental US, typically dispatched within 1–2 business days of payment.
How do I program the coin values and tube fill? The MCM5 uses a 9-button keypad with labeled functions for coin inhibit, manual tube fill, and diagnostics, so setup is done on the mech itself — no external programmer required. Once mounted and plugged into the MDB harness, the machine controller reads the changer automatically, and you can top off each tube through the rear-loading cassette.
Why choose a 5-tube changer over a 3-tube unit? The extra tubes and high-capacity cassette hold far more change — up to two full rolls per tube — which is what prevents the “exact change only” lockouts that cost sales on high-traffic locations. For busy offices, gyms, or 24-hour sites, the added change reserve pays for itself in captured transactions.



